1. Use All Steel Radial Mining Truck Tires on the highway, never overload. If it is overloaded, the angle effect will increase due to the uneven angular arrangement of the belt layers of All Steel Radial Mining Truck Tires, and at the same time, the maneuverability and stability of the vehicle will be deteriorated, and it will easily cause tire blowout.
2. The sidewall of All Steel Radial Mining Truck Tires is thinner, so the deformation is large, and the force on the sidewall and bead is much larger than that of ordinary diagonal tires. Therefore, the transition area between the tread and the sidewall of All Steel Radial Mining Truck Tires Cracks are likely to occur near the rim. At the same time, All Steel Radial Mining Truck Tires are more sensitive to small unevenness on the road surface and have poor shock absorption capacity, which is detrimental to ride comfort. Therefore, radial tires are not suitable for driving on roads with poor pavement, and should avoid ruts, curbs, stones or other sharp obstacles hitting the sidewall during driving.
3. Due to the thin sidewall and low lateral strength of All Steel Radial Mining Truck Tires, the lateral stability performance is deteriorated. Therefore, high-speed sharp turns and emergency braking should be avoided during driving to prevent early tire wear.
4. All Steel Radial Mining Truck Tires should not be mixed with ordinary diagonal tires on the same car, because the radial elasticity and co-slip of these two tires are different, which will cause the tire rolling radius to vary. It is also not possible to install radial tires on the front wheels and diagonal tires on the rear wheels, otherwise it is easy to flick when turning on the highway, especially in rainy days, which is more likely to happen.
5. Strictly maintain the standard air pressure required by All Steel Radial Mining Truck Tires when they leave the factory. The inflation standard of radial tires is higher than that of diagonal tires. At the same time, it should be noted that it is not allowed to reduce the tire pressure that normally rises while driving.
6. Tire rotation should be carried out according to the technical maintenance regulations. Timely rotation of the tires can reduce the different wear rates of each tire and the uneven wear of the tire pattern, which is conducive to the smoothness of the car.
7. All Steel Radial Mining Truck Tires have complex process and high production cost, and the price is about 25% higher than that of ordinary diagonal tires.